5 3 Ls Rocker Arm Torque. LS Rocker Arm Torque Specs & Sequence The LS rocker arm torque specs are 22 lb-ft or 30 Nm Although the 4.8 and 5.3 are called Vortec, they still share the same geometry as LS-Series engines
D16Y8 Rocker Arm Torque Spec R/civic, 57 OFF from www.elevate.in
For the LS 5.3 engine, the rocker arm bolts should be tightened to 30 Nm (22 lb-ft) The torque specs for the Chevy 5.3 rocker arms can vary depending on your engine and the type of rocker arm you have
D16Y8 Rocker Arm Torque Spec R/civic, 57 OFF
To properly torque the rocker arms on a 5.3L engine, you'll need a torque wrench, a socket set, and a few other tools This specification applies to both intake and exhaust rocker arm bolts. The sequence of 6.0 LS rocker arm torque is the same as mentioned above, with the torque being 22.
D16Y8 Rocker Arm Torque Spec R/civic, 57 OFF. This torque sequence applies to all LS engines, including the 5.3 and 4.8 LS engines Start with the specs: 22 lb-ft for initial torque and then 90 degrees for final torque
Chevy 5.3 Rocker Arm Torque Specs Truck Guider. This guide provides detailed information on the torque specs, tightening sequence, and best practices for working with LS 5.3 rocker arms With the engine in the number one firing position, tighten the following valve rocker arm bolts: Tighten(1) Tighten the exhaust valve rocker arm bolts 1,2,7, and 8 to 30 N·m (22 lb ft)(2) Tighten the intake valve rocker arm bolts 1,3,4, and 5 to 30 N·m (22 lb ft)